Differences

This shows you the differences between two versions of the page.

--- car_auto:corolla [2025/05/09 06:44] – created John Harrison
+++ car_auto:corolla [2025/05/09 06:56] (current) – John Harrison
@@ Line 1: / Line 1: @@
 ===== 2019 Corolla =====
 ==== CVT Transmission Service ====
+//to be done every 60K miles?//
   * Fill Plug washer/gasket part #: 90430-18008
   * CVT Drain Plug washer/gasket part #: 90430-12008
   * //[[https://www.toyotanation.com/threads/changed-the-cvt-fluid-drain-fill-on-my-18-le-cvt-today-at-50k-miles-my-experience.1787242/|Source]]//
+  * {{ :car_auto:tis_-_toyota_2014-2019_corolla_repair_manual_rm30n0u_fluid_level_check.pdf |Official Service Procedure from Toyota}}
+  * [[https://www.youtube.com/watch?v=eRxSu4-4ojo|video from Car Care Nut (Toyota technician)]]
+=== Getting the correct temp ===
+  - jumper between pins 4 and 13 of OBD2
+  - start car.
+  - P, R, D, R, D a few times
+  - N, D over and over until D sticks (N doesn't show)
+  - Shift to park. Keep engine running throughout
+  - Disconnect jumper pins (important or idle speed might be incorrect)
+  - While in Park, look at dash shift indicator for correct temperature
+    - If no gear shown (it's blank), temp too low. Wait
+    - If D is solid, temp correct. Drain excess fluid
+    - If D blinking, temp too hot. Shut off engine, let cool down, try again.