Differences

This shows you the differences between two versions of the page.

--- lwc:hardware:smarttable [2025/02/16 11:54] – John Harrison
+++ lwc:hardware:smarttable [2025/03/11 08:19] (current) – John Harrison
@@ Line 9: / Line 9: @@
 ==== Getting Smart Table SDK to work with Win 10 home (WIP) ====
+//SDK must be built under .NET framework 3.5. Updating the framework breaks the SDK//
   * [[https://github.com/fumba/gburg-virtual|this repo]] has the DLLs needed for the SDK
   * needs [[https://aka.ms/vs/15/release/vs_community.exe|VS 2017]] (2022 will not work with .NET framework v3.5)
   * Needs .NET framework 3.5 developer pack installed. Install via VS Installer:
+    * in ''Visual Studio Community 2017'' "cell" click on ''Modify''
+    * choose the ''individual components'' tab
+    * choose ''.NET Framework 3.5 development tools''
+    * click ''modify''
+==== Audio ====
+  * The Open Pluggable Specification is [[https://en.wikipedia.org/wiki/Open_Pluggable_Specification|on wikipedia]] and shows audio out on pins 69 and 70
+  * These pins were apparently left disconnected on the upgrade Boxlight unit I bought to replace the original i3 the 442i came with
+  * [[https://www.intel.es/content/dam/www/public/us/en/documents/technical-specifications/ops-thermal-spec.pdf|A primary source for OPS]] corroborates using pins 69 and 70 for audio out
+  * For the Boxlight unit I wired the audio out directly to these 2 pins to get the built-in audio of the table to work