This is an old revision of the document!
TPU
Overture
- Temp 220
- retract 25
- unretract 25
- feedrate 30
- retraction 8.5
- speed 25
- cooling fan 100%
2 color printing
Cura
- post processing scripts –> pause at height
- Pause at the layer before where you want to color to change i.e. the last layer before you want to switch filaments
- it should be worded as pause *after* layer
- example: if new color starts at layer 6 pause at layer 5
- park print head X and Y both to 0
- set retraction to 0
- set standby temp to printing temp
- method: Marlin (M0)